Alan, Don't dive into piano actions anymore...;-] David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Alan R. Barnard" To: pianotech at ptg.org Received: 8/15/2006 1:08:30 PM Subject: Nightmare & Question Diving into the action of a 1921 Baldwin Hamilton upright, I found a nightmare of cracked and broken flanges, bent center pins, and broken jack springs. Man, I've probably replaced a handful of jack springs in past years, now I had about 12 in one piano. Sheesh. Anyway, most of the hammer pinning is okay, I think, in that I can apply Protek, swing them a dozen times, and then measure 5+ swings. But (and here I appeal to people who have used Protek in this manner) can I count on that to hold up, or will they tighten up again? Alan Barnard Salem, MO Joshua 24:15 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060815/7efaf58e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC