Hi Patric, I think you are on the right track , loose screws allowing the rail to move. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Patrick Poulson To: Pianotech List Sent: Wednesday, August 30, 2006 2:43 PM Subject: Re: let off gone berzerk Joseph: My first suspicion would be that the letoff button rail is out of position. Patrick C. Poulson Registered Piano Technician Piano Technicians Guild ----- Original Message ----- From: Joseph Alkana To: Pianotech Sent: Wednesday, August 30, 2006 12:58 PM Subject: let off gone berzerk OK, customer says no power in last octave plus on her run-of-the-mill Wurlitzer console. I look at hammer blow and it is at 1 3/4". Let off is at 1 1/2". Yikes, I say! The rest of the keys all let off around 1/8". Piano just was moved, but under supervision of owner. No visible signs of damage anywhere. Question: How did the last octave plus get in this condition, which customer swears is a new problem since move? I'm stumped. I don't want to do the adjustment to let off with out understanding the problem of how it got so far off in this one area. Should I be looking for something a whole lot more hidden? Joseph Alkana RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060830/a9b6587a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC