Ok, I'll check the action bracket "feet" seating. The let-off rail, though, was/is solidly screwed in place. Joseph Alkana RPT ----- Original Message ----- From: "Jonathan Finger" <pianotech at tollidee.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Wednesday, August 30, 2006 2:24 PM Subject: Re: let off gone berzerk > > > HI Joseph - > Without knowing anything else about the piano, the first thing I would > look at is the seating of the action at that top (treble). Make sure that > the top action bracket is firmly seated at the foot. It seems weird that > the hammerline would be ok if the action weren't seated, but nonetheless, > it's where I'd start - if for no other reason than to make sure that the > 'foundation' is in order. > Secondly, as others have mentioned, (and perhaps this should actually be > first) I'd look at the letoff rail as well, and make sure it's where it is > supposed to be. > > Jonathan Finger RPT >
This PTG archive page provided courtesy of Moy Piano Service, LLC