Hi Ron, When you say 'wet sand', what do you use as the wetting agent, and is it a felt block you use? Thank you. John M. Ross Windsor, Nova Scotia, Canada. jrpiano at win.eastlink.ca ----- Original Message ----- From: "Ron Nossaman" <rnossaman at cox.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Tuesday, August 29, 2006 7:55 PM Subject: Re: Keytops ?? :-( > >>...and I don't want to get into sanding the entire set of 'new' >>keytops just to get rid of these danged thingees.......must be getting >>lazy in my later years. :-) >> Just wondering what others are using for keytops. >> Jim Bryant (FL) > > > I'm not a fan of high gloss *anything*, so I wet sand 'em with 600 > grit instead of buffing. So far, no one who's seen and felt the > difference has chosen the buffed. But then I don't do that many keytop > sets. Been using the tops with fronts from Schaff. > > Ron N >
This PTG archive page provided courtesy of Moy Piano Service, LLC