> -----Original Message----- > From: pianotech-bounces at ptg.org > [mailto:pianotech-bounces at ptg.org] On Behalf Of Frank Emerson > Sent: luni, 18 decembrie 2006 08:05 > To: Pianotech List > Subject: RE: Spreadsheet info / Jason Kanter > > One thing I failed to mention in my earlier post is that I > avoid allowing a > section break to coincide with a wire gage change. This only > exacerbates > the bridge dog-leg problem. I would move the section break, > before I would > allow the wire gage change to occur at the break. In a > rebuilding-rescaling situation, one cannot change the section > break, but > you can avoid wire gage changes at the break, even if it > compromises the > tension smoothness curve. What exactly is the dog-leg problem? I thougth a dog-leg is used to allow a smooth progression of string lengths, according to whatever formula one uses, when the bridge meets a plate strut. I have also seen pianos designed without doglegs (and not cheap ones) where the somewhat longer than normal string to the left of the strut didn't seem to adversely affect the sound. Calin Tantareanu http://calin.haos.ro --------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC