Hello Paul, Contact Jim Coleman Jr. He will have whatever you need for your screw stringer. 602-989-0005 or colemantools.com Gary Telleen PianoTonix wrote: > I recently tuned an 1885 Mason & Hamlin screw stringer upright. > Someone did extensive work on it about 15 years ago, and apparently > replaced three of the screw stringers that presumably were > broken/damaged. However, the replacements were homemade and do not > stand up to tensions/torsions/stresses of tuning. They are all in the > extreme treble, so it's not really crucial (the owner is a very > amateur player and "doesn't need" those notes) but we'd both like to > replace as many of the 3 homemade ones with original equipment if > anyone can find me 1-4 of them. For the uninitiated, I am attaching a > pix of the piano and a detail of the screws. > Many Thanks, > Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061228/d5c61350/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC