In a message dated 12/28/2006 9:47:00 PM Eastern Standard Time, KeyKat88 at aol.com writes: Greetings, There is a way you can globally adjust the balance rail to make more aftertouch. At least that is what I did on a BAldwin Hamilton recently. There are 4 or 5 screws across the balance rail, just under the b flats that adjust the entire balance rail's height, then there are stabilizing screws in between them, so that when you raise the balance rail you can then make the alternate screws hold them there at the desired height. You may not have to indivudually regulate. Get some more opinions on this, as I only did it once in my whopping 3 1/2 years experience, and probably am not explaining it as well as another can. Julia Gottshall Reading, PA -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061228/6ac97f5c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC