> However, I did incorporate some of Ron's suggestion (although not the > heart of his suggestion) - I ran a length of #17-1/2 music wire along > the bottom side of the flange screw (nice snug fit) and kept the upper > brass rod. Don't. That won't last. You need contact area. Either build up the rail to fit the flange, or change flanges. > I have to admit that I still like the idea of having the full height of > the flange intimately contacting the action rail. If nothing else, it > will likely make me sleep better at night.... > > Terry Farrell > > BTW: What kind of flange does is completely flat on the back side - no > cut-out? Try Renner, or Pianotech, or Schaff, or Brooks, or... Check your catalogs. You ought to be able to come up with something secure enough to allow sleeping. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC