---------------------- multipart/alternative attachment Hi JOe, do thse Sole tips work with the Schaff #21 hammer, and how are they different than the tips shcaff sells? Also, what degree angle is best 15 or 5 for the head? Marshall ps. Did I tell you that I've seen one of the levers you make with the ball on the end. I was up in Madison getting some tutoring from an RPT who knows you, Bill Bremmer, and he has one of your levers, a really neat one I must say. -------------- Original message -------------- From: "Joe And Penny Goss" <imatunr@srvinet.com> > Hi Don, > We carry #2 and #3 "sole" tips > Joe Goss RPT > Mother Goose Tools > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "Don Price" > To: "PTG LIST" > Sent: Thursday, February 16, 2006 3:40 PM > Subject: tips > > > > List - I've used the Hale hammer (lever), heads and tips for umpteen > > years. Needing to replace a couple of tips and since Hale is not longer > > in business, I ordered from Schaff. The Schaff tips fit the threads on > > the hammer O.K., but the tip doesn't fit the pins as well as the Hale > > tips did. The Schaff tip seems to fit well on the pin at the very end > > of the tip, but there seems an extreme amount in and out play (on an > > upright) on the end of the hammer. On a twelve inch hammer length, the > > end of the hammer will move in/out 1 1/2 to 2 inches. The Hale tips > > let the hammer end move less than 1/2 inch. > > > > Do any of you have a recommendation for another place to find tips which > > provide a better fit with the pin? > > > > Thanks. > > > > Don > > > > _______________________________________________ > > Pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ > Pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/06/0e/82/ff/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC