---------------------- multipart/alternative attachment Hi Marcel, Pianotech sells poplar plugs that does the job very nicely, also the right size drill bit to ream the old lead holes to make a nice fit. I used to cut my own plugs and found it too time consuming. I you only need a few dozen plugs I can bring them along to Calgary. Regards Roger At 07:56 AM 2/18/2006, you wrote: >Hi, > >I'm trying to get a 15mm plug cutter to fill in keys after lead removal. >I searched and looked at canadian woodworking suppliers and couldn't >find any. Is there anyone out there who could direct me to a supplier? > >Thanks, > >Marcel > >Marcel Carey >2852 Dussault >Rock Forest QC >J1N 2V6 >(819) 564-0447 >mcpiano@videotron.ca > > >_______________________________________________ >Pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/11/c3/23/d9/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC