Brass but plates

[Alan R. Barnard]

Schaff and others will duplicate the rails. You have to mail them the carcass of the old one.

Alan Barnard
Salem, MO
Joshua 24:15





Original message
From: KeyKat88 at aol.com
To: pianotech at ptg.org
Received: 07/14/2006 8:59:25 AM
Subject: Brass but plates


Greetings, 
 
            On an old upright, instead of flanges on the ends of the hammer butts there is a brass plate system of attatchment to the action rail. If the corners of the brass plate in the paino are broken off, can one replace the entire brass butt plate? In a shop, Are they easy to remake?How many hours would this job take?
 
 
Julia Gottshall
Reasding, PA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060714/c5e84e8d/attachment.html