Baldwin SD-10 Treble Counterbearing

[Overs Pianos]

Hi David,

>Has anyone ever modified the Baldwin SD-10 modified counterbearing set up
>with that fancy looking kazoo?

We've reshaped the bars with an angle grinder, followed by a die 
grinder etc., to achieve a smaller radius.

>   It looks as though the counterbearing
>segment is a bit long for the angle of inclination yet changing it seems,
>well... any ideas, experience (especially with good results).

I agree its too long, but we decided to leave it with just a reshape. 
We re-plated it with electroless nickel.



The modification was quite successful.

Best regards,
Ron O.
-- 
OVERS PIANOS - SYDNEY
    Grand Piano Manufacturers
_______________________

Web http://overspianos.com.au
mailto:ron at overspianos.com.au
_______________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060728/969d9cd4/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sd10.capo.jpg
Type: image/jpeg
Size: 49053 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060728/969d9cd4/attachment-0001.jpg