Thanks, William. Couldn't have said it better myself. Obviously! :-D Avery At 09:49 PM 9/5/2006, you wrote: >Michelle, > >I think Avery's point was that unless the hammers are not traveling >in a straight line from rest to the point where they strike the >strings, using traveling paper under the flanges is not the proper >way to correct the problem. Indeed it may then cause your hammers >to not travel straight - now you've another problem to correct. > >If the grooves are not lining up again, it is more likely simply >spacing the hammers that needs to be done, not traveling (though I >wouldn't be surprised if some traveling were required, but not to >make the grooves align with the strings). > >Regards, >William R. Monroe > > >----- Original Message ----- >From: <mailto:michelle at cdaustin.com>Michelle Smith >.........Concerning the traveling paper, I just slipped them in >temporarily to see if they would help rotate the hammer back into >the grooves. I didn't want to do anything permanent yet. In three >of the four, it helped. The grooves definitely need to be dealt with. > >Have a great evening. > >Michelle > > >Hi Michelle, > >At 05:50 PM 9/5/2006, you wrote: > >Hi all. A couple of days ago I asked the group about Naphtha and >other liquids that might free up an old Steinway action. The >hammers were really stiff (1 to 1.5 swings) so I removed each >hammer, lubricated, wagged them back and forth, and got about 5 >swings out of them. > >What did you lube them with? Naphtha? > > >I was so proud of myself until I put the action back in the >piano. The action moved much better but two other things happened: > >The piano had a more mellow tone--almost muffled in some areas >About four notes have a strange small tinny sound almost like a >guitar string is being plucked. >Is it possible that the strings arent hitting exactly in the same >(deep) grooves as before? I put some travel paper under the tinny >notes which helped some but not all. > >Why did you do that? Were they not traveling correctly? Tinny notes >don't necessarily mean they aren't traveling correctly. Travel the >shanks, do the burning and then see what they sound like. Then do >the hammer to string mating. Traveling isn't the way to correct a >"tinny" sounding note. Necessarily! :-) > >Avery -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060905/eb8f92b7/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC