has to be true! This is a remington! Shawn Brock Cincinnati Sound Lab 130 East Sixth Street Cincinnati Oh. 45202 Phone: 513-349-8541 Web Site: www.cincysoundlab.com ----- Original Message ----- From: "Ron Berry" <ron at berrypiano.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Thursday, September 14, 2006 3:01 PM Subject: Re: BAD, BADD, PIANO >I have found that any piano made in Richmond, IN (Starr, Jesse French, > Lagonda, Remington,etc.) will likely have a bad pinblock. They must not > have seasoned the wood well or used bad stuff. Maybe I just see more of > these because I live in Indiana. > > ron > > On 14 Sep 2006 at 13:57, Avery wrote: > >> >> Shawn, >> >> Glad you've learned that lesson! :-D >> >> At 01:36 PM 9/14/2006, you wrote: >> sounds good! I am getting them out to look at a new piano soon. But I >> have told them in >> the mean time I would see what i could do with the one they have. >> >> As far as the loose tuning pins are concerned, if you're going to try and >> work on it, use CA. It >> usually works. But with all the loose hammer felt, I don't think I'd even >> do that without "fixing" the >> other first! >> >> Avery >> >> The one thing I have learned about word of mouth is, if you make >> someone happy they >> might tell one person, but if you make someone mad they will tell >> everyone they know. >> Shawn Brock >> Cincinnati Sound Lab >> 130 East Sixth Street >> Cincinnati Oh. >> 45202 >> Phone: 513-349-8541 >> Web Site: >> www.cincysoundlab.com > > ---------------------- > Ron Berry Piano Service > Indianapolis, IN 46220 > 317-255-8213 > ron at berrypiano.com > http://www.berrypiano.com > >
This PTG archive page provided courtesy of Moy Piano Service, LLC