Greetings, Then do you soak the hammer or just wet the strike point and alittle beyond? Also. after the laquer thinner is applied, I would think that blotting the thinner to remove it also removes the unwanted laquer with it thereby softening the hammer OR does merely applying the laquer withou blotting it back off enough to soften the things? Thanks Julia Reading, PA In a message dated 9/17/2006 5:20:52 PM Eastern Standard Time, ricbrek at broadpark.no writes: Try a reasonably strong lacquer thinner... if that softens the hammer then its not keytop. Cheers RicB -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060917/e5366491/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC