RicB said: "Like most others I suspect the rod is just a bit too low. Just recheck the regulation of the whole thing. Set the angle of the blade to 45? by adjusting the pedal, then set the height of the rod so that when you look at it through the the action cavity it makes a straight line with the middle of the tabs. Finnally line up the for and aft position looking from above. It should show about 1.5 to 2 mm distance from the tabs at rest. Once the rod is regulated correctly, you can determine if there is anything needed with respect to the tabs" People, What's with all this? You need to have the proper TOOL for checking the sostenuto. It is available from Steinway. Sheesh! But then, ya need to know how it is used.<G> Joseph Garrett, R.P.T. Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060927/b761df5e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC