CA glue and pinblock cracks

[Dean May]

It will work I can almost guarantee it. You really don't have anything to
lose except a little time. If it doesn't work, don't charge the customer. 

 

Tip the piano on its back, use 2 oz for the whole block, give a little extra
to the problem areas. Let it sit for 30 minutes. Lightly mist accelerator
over the pin field to cause any residual pools of CA to set up before
uprighting  piano. Set piano upright and tune. Maximum holding power may not
develop for a day or two. 

 

If you still have a problem pin or two, remove pin, squirt CA directly into
hole, reinsert pin. I've never not had this work (double negative used for
emphasis).

 

I charge $245 and warranty it for 8 years. If you can't get the pins to hold
for 8 years doing this, refund their money (something I've never had to do
yet).

 

 

 

Dean

Dean May             cell 812.239.3359 

PianoRebuilders.com   812.235.5272 

Terre Haute IN  47802

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Michelle Smith
Sent: Friday, April 06, 2007 9:29 PM
To: 'Pianotech List'
Subject: CA glue and pinblock cracks

 

Hi all.  Customer has a 109 year old Kimball upright.  (Why do I keep
working on these things??)  I'm pretty sure it has a crack along the bottom
row of tuning pins and am wondering if a CA treatment would fill in the
crack (and pinholes) enough to hold the pitch.  The customer understands
that a restringing/new pinblock is what's really needed (or a bonfire).

 

Thanks for your help!

 

Michelle Smith

Smith Piano Service

Bastrop, Texas

(512) 466-0238

michelle at smithpianoservice.com

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070406/fe8857be/attachment.html