Good suggestion. Thanks. I will.
-- Geoff
-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Mike Kurta
Sent: Saturday, April 07, 2007 2:04 PM
To: Pianotech List
Subject: Re: CA glue and pinblock cracks
Hi Geoff:
The general thinking is that CA will hold even better on pinblocks that
have been previously treated. I would however, check for signs of
delamination and cracking. I usually remove the fallboard and visually
check with a good light and mirror if needed as well as feeling all over the
block as best you can especially at the edges.
Mike Kurta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070407/bbf381eb/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC