Would PVC-E work? My very limited attemps with spray adhesive is that it goes more places than you want it to. It might be messy. ??? Let us know. :-) JF On 4/16/07, Paul Chick (Earthlink) <tune4 at earthlink.net> wrote: > > > > > List Members > > The suede on the music desk of a Kawai KG-1 has finally peeled off (or the > choir director quit his attempts at repair). Bill at Jansen & Son, Inc. > told me he can, and now is, sending me a new piece cut to size. My plan is > to use 3M Spray Adhesive-industrial strength. I have successfully used this > glue in the past for various jobs including veneer replacement in small > areas. This is my first repair with this glue on leather to poly. I intend > to remove any remaining crud/leather that is on the desk, lightly sand the > area with 220, carefully clean off any suspected contamination, and apply > the adhesive to the desk and the leather. The directions call for assembly > while the parts are still wet to get a permanent repair. I'm I heading for > trouble? > > Thanks for your replies. > > > > Paul C
This PTG archive page provided courtesy of Moy Piano Service, LLC