Tomb Stone

[Joe And Penny Goss]

Thats not them they are the old style.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: John Ross 
  To: Pianotech List 
  Sent: Sunday, April 22, 2007 7:10 PM
  Subject: Re: Tomb Stone


  Schaff old catalogue, page 134, item #1064.
  John M. Ross
  Windsor, Nova Scotia, Canada
  jrpiano at win.eastlink.ca
    ----- Original Message ----- 
    From: Joe And Penny Goss 
    To: Pianotech List 
    Sent: Sunday, April 22, 2007 7:15 PM
    Subject: Re: Tomb Stone


    Hi John,
    The music hinge that is bolted to the music rack board and a screw passes through a hole fastening the music rack to the board. Most spinets from the 60s had this type of attachment. They are very weak and break the music rack where they are attached to the rounded tomb stone. Sort of like an upside down U with a screw through it.
    Joe Goss RPT
    Mother Goose Tools
    imatunr at srvinet.com
    www.mothergoosetools.com
      ----- Original Message ----- 
      From: John Ross 
      To: Pianotech List 
      Sent: Sunday, April 22, 2007 2:28 PM
      Subject: Re: Tomb Stone


      Joe, I am unfamiliar with the term, 'tombstone hinge', would you elaborate?
      Please and thank you.
      John M. Ross
      Windsor, Nova Scotia, Canada
      jrpiano at win.eastlink.ca
        ----- Original Message ----- 
        From: Joe And Penny Goss 
        To: Pianotech List 
        Sent: Sunday, April 22, 2007 12:49 PM
        Subject: Tomb Stone


        Hi,
         Any one know the sourse of replacement tombstone desk hinges that have the threaded eye in the tombstone hinge>
        I think the brand is Hazelton. Anyway a 3 year old piano with the screw stripped and lost with a replacement screw that is too short. So I assume we need the screw and hinge.
        Joe Goss RPT
        Mother Goose Tools
        imatunr at srvinet.com
        www.mothergoosetools.com
          ----- Original Message ----- 
          From: Clark Sprague 
          To: pianotech at ptg.org 
          Sent: Saturday, April 21, 2007 6:14 AM
          Subject: Samick Console


          Anybody out there have the little plastic turnbuckle used on the muffler rail-pedal connection in a Samick console?  I need 1 ASAP, and the supply houses don't seem to have those.  They strip out easily, the top and bottom have different diameters, and probably have metric threads.  HELP!  
          Clark A. Sprague, RPT
          csprague4 at woh.rr.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070422/c06dcd09/attachment.html