Does the protech stain the cloth at all???? just wondering Steve OC CA Prua Vida > [Original Message] > From: <A440A at aol.com> > To: <pianotech at ptg.org> > Date: 8/3/2007 7:59:06 AM > Subject: Re: Counter-bearing drag > > > << > There is a S&S locally right on the water, well not really, water > > > view/water front. > > > > > > There is noticeable and detrimental drag to a section in the high tenor. > > > I can move the lever almost '5 minutes' (clock index) before the tension > > > drops, > > > conversely on raising. Needless to say, these notes are not stable. > > >> > > This is where my old pro-tek goes, I use an eye-dropper and make sure I wet > the whole length of string on the bearing cloth, and usually a little less in > the upper sections. > Works like a dream,but I have to do it every time on some pianos with a lot > of rust on them. > Regards, > > > > Ed Foote RPT > http://www.uk-piano.org/edfoote/index.html > www.uk-piano.org/edfoote/well_tempered_piano.html > <BR><BR><BR>**************************************<BR> Get a sneak peek of > the all-new AOL at http://discover.aol.com/memed/aolcom30tour</HTML> >
This PTG archive page provided courtesy of Moy Piano Service, LLC