> Ron > > I like this. This is also easy. I could also do this. And I feel > better about getting the soundboard back into its proper position: > against the rib. > > Just to understand completely...you drill the hole in the rib to let the > glue in to the gap; the screw however, goes through the rib and INTO the > soundboard. Tightening the screw draws the soundboard into the rib; > that's why the glue squeezes out. Yes? Leave the screw in for a little > extra added insurance. Yes? Yes, all around. > Perhaps dumb questions, but I do want to make sure I'm getting it right. > > Thanks, > Tom Not dumb questions at all, just clarification. That ought to be allowable. Whether or not it's right is a judgment call that makes my cut. If it makes yours too, it's a viable option. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC