My understanding is from a chemical standpoint steel on brass is self lubricating. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jude Reveley/Absolute Piano Sent: Tuesday, August 07, 2007 10:10 PM To: pianotech at ptg.org Subject: Counter-bearing drag Ahh, kinda late in the thread, but I've been thinking...oh no! I'm looking to upgrade my string terminations on my rebuilds too like so many of you cool guys and gals so my questions are: 1. How do bend your half rounds to conform to any required sweep? Clamp in a form? 2. Why brass? It is so soft, will get marred by the strings and eventually tarnish? Why not anondized aluminum or titanium? If it's a question of economics, shouldn't we at least plate the brass? Thanks for any thoughts... Jude Reveley, RPT Absolute Piano Restoration, LLC Lowell, Massachusetts (978) 323-4545 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070807/039f6663/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC