"Vapors" From CA Treated Pinblock?

[Ron Nossaman]

> Good point, I return tomorrow for the tipup and tune, I'll check it 
> then. I used the very thin CA I'm thinking it probably flowed through 
> the wood but it is possible there's a seperation, Wurlitzers are good 
> for that. I think that's one of the reasons they switched from the felt 
> to the 1/4" plywood on the tops. 

To hide the problem better?


>It's just possible the CA filled the 
> opening if it's a small enough one.

Filling the opening with a glue of low tensile strength with 
no additional mechanical fasteners doesn't strike me as a 
particularly positive thing.
Ron N