Neither. Rest your palm on the flanges and hold your fingers over the shanks so that when you strike a group of keys (with the other hand) your fingers sort throw them back down on the backchecks simulating, to some degree, the rebound off the string. Double check in the piano to make sure that the checking with the action out is duplicated with the action in. It often isn't because of the change in key dip with the key frame not bedded. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of brittanykirk272 at comcast.net Sent: Tuesday, August 28, 2007 4:14 PM To: PTG questions Subject: grand checking adjustment I have been taught two different ways to adjust grand checking, and I would like y'all's opinion on which you think is more accurate. 1. Strike the key, see where the hammer checks, and adjust accordingly. 2. While holding the key down, lift the hammer, and let it fall into a checked position. If I make everything even with method 1, then re-assess with method 2, checking is uneven... and vice versa. Advice, please. Brittney -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070828/083ddae9/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC