Grand damper jigs

[Richard Morgan]

Would you be willing to share pictures of your damper jigs?

Richard


----- Original Message ----
From: "PIANOTECHNICIAN at aol.com" <PIANOTECHNICIAN at aol.com>
To: pianotech at ptg.org
Sent: Sunday, February 4, 2007 9:31:15 AM
Subject: Grand damper jigs


When I re-felt a set of grand damper heads, I always use jigs when gluing on monochord, bichord, and 2 trichord pieces. The jig aligns the front and back pieces so that they're perfectly in line with each other- -this makes regulation much easier. It's hard enough to do an A-1 damper job normally, but to try to do it when the front and rear dampers don't line up on some damper heads is near impossible. Is the use of jigs common among technicians, or am I the odd ball out there?
 
Jesse Gitnik - NYC  
Since 1980
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070204/5ddeae9f/attachment.html