Paul, I am sure that David Lawson knows what 'Inharmonicity' means. As he has been in the industry for over 45 years, and has worked for Steinway London. What he was saying is that it is not in the Macquarie Dictionary. Don't jump to conclusions!! The Microsoft Dictionary does not like it either!! Kerry Cooper ARPT Brisbane Piano Centre ph: +617-3809-0652 Fax: +617-3809-4699 email: brispiano at optushome.com.au -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Paul Milkie Sent: Monday, 5 February 2007 1:50 PM To: pianotech at ptg.org Subject: Inharmonicity David, in Australia; Inharmonicity is the discrepancy between the theoretical frequencies of partials and their actual frequencies.With the exception of the first partial(the fundamental), the partials of piano tone are sharper than their theoretical frequencies, which would be exact multiples of the fundamental. This necessitates tuning octaves wider than theoretical in order to obtain an acceptable compromise of these discrepancies. The first partial of A4 is tuned to 0 cents deviation, but all notes above it are tuned increasingly sharper,and all notes below it are tuned increasingly flatter than what they would be theoretically. The result is the piano's stretch. (P.50 of the Verituner 100 user guide). ____________________________________________________________________________ ________ Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. http://answers.yahoo.com/dir/?link=list&sid=396545367
This PTG archive page provided courtesy of Moy Piano Service, LLC