More on YC action brackets

[Dean May]

I was thinking the same things. Perhaps we could get some drawings made that
any good machine shop could use to make a set. Then keep them posted on the
PTG site so anyone who needed a set could download them and get them made. 

I've got a set for a G208.

Dean

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Andrew and Rebeca Anderson
Sent: Monday, February 05, 2007 11:36 AM
To: Pianotech List
Subject: Re: More on YC action brackets

This might be a little difficult to obtain, but anyone can trace the 
proper sized graphics and then pay someone to make them.  I think 
making a business of manufacturing and selling the brackets might 
require licensing from  YC.  Anyone have these to trace?

Andrew

At 10:18 AM 2/5/2007, you wrote:
>I called YC last week concerning this issue.  The girl who answered the
>phone knew nothing about the issue.  I was told that Jeff Dunmire who is
>listed in the PTG directory had left that company that day, and that the
>phone was being answered in CA instead of WA.
>
>My client is willing to pay for the work.  Can anyone tell me where the
>brackets can be obtained?
>
>Ray Bentley
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>Ray T. Bentley, RPT
>Registered Piano Tuner-Technician
>Alton, IL
>ray at bentley.net
>www.ray.bentley.net <http://www.ray.bentley.net/>