Hank, The Quarter grands I've seen have three or so sections of pinblock machine screwed to the underside of the plate. I have not seen any brass flanges on a grand like there are on some old Chickering uprights. Albert. On 2/14/07, Hank Lea <colopiano at gmail.com> wrote: > > > Dear fellow tech's, > I am biding a rebuilding job on a 1906 Chickering quarter grand from > out of state. My question is to all, does this model have the brass > whippen flanges and the brass hammer shank flanges? Also, does this > model have a sectioned pinblock? Since I can't look at the piano, I > thought maybe someone might have some info on this model. If there is > anything else that might be unusual about this model, please speak up. I > have worked on these before, but it's been a long time. Thanks! > > Hank > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070215/833f087c/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC