There are some grands out there where you have to be very careful while pulling out the key frame from the piano. The plate/action combination is designed in such a way that the hammers near the treble break are very close to the lower part of the plate, and if the keyboard is not pulled out or pushed back in straight, a hammer adjacent to the plate could break off. Is this a poor design, or what?! Jesse Gitnik Since 1980 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070215/61c90bb2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC