strip muting with sheet metal

[David Nereson]

  -----Original Message-----
  From: pianotech-bounces at ptg.org
[mailto:pianotech-bounces at ptg.org]On Behalf Of
pianotune05 at comcast.net
  Sent: Sunday, February 25, 2007 5:09 PM
  To: pianotech at ptg.org
  Subject: strip muting with sheet metal


  Is there a subsitute for sheet metal?  I don't have a shop. I
wonder if they still make these metal rulers that were kinda fat
and flimsy, and is so would that work?
  Marshall

  I don't know what kind of ruler you mean, but mine is just a
piece of fairly stiff sheet metal, about 4" x 5", with about
3/4" of the top edge folded over at a 45 deg. angle or so.
      -David Nereson, RPT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070227/0b5eb342/attachment.html