If you look at those two notes, you might find that the tuning pins are positioned close to the v-bar because of a plate screw positioned there. This, combined with a steep angle from the v-bar to the coil causes the string to want to climb up the coil when tightened. You can try to remove the coil and back the pin out a few rounds, but risk reduced pin tightness and increased flagpoling. John Voigt -----Original Message----- From: pianolady50 at peoplepc.com [mailto:pianolady50 at peoplepc.com] Sent: Tuesday, February 27, 2007 9:18 PM To: Pianotech List Subject: P22 string breakage Paul said: On the string breakage note, yesterday I had A1 and A#1 break in a school band room piano...Yamaha P22, 1993 vintage. Interesting...I have begun servicing the pianos at my local high school. Included are two P22s. Both had broken (and long since removed) A1 strings. They had been gone for about 5 years :( Debbie -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070228/bfc483b2/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC