Brian, For years I used the last three damper heads from the action placed on a sticker in the middle of each section. I now use three rubber mutes inserted over the pins (or "needles" as you referred ) to secure the rail to the top of the stickers. If I remember this tip came from esteemed colleague Jon Page. Tom Driscoll Subject: Acrosonic Agony Hello, Is there anyone who would be able to sell me a whippen assembly for a Baldwin Acrosonic..the type that uses the long wooden sticker? I normally order from Schaff, but since I only need 1, and nothing else, my order would be too small. Also, what tips do you have on keeping the wooden sticker needles in the holes of the guide rail when removing an Acrosonic action. I had to put them all back when the rail came off. It was not fun and I'd like to try and avoid that situation again. Thank you, Brian P. Doepke -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070106/861902d8/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC