Subject: Acrosonic Agony Hello, Is there anyone who would be able to sell me a whippen assembly for a Baldwin Acrosonic..the type that uses the long wooden sticker? I normally order from Schaff, but since I only need 1, and nothing else, my order would be too small. Also, what tips do you have on keeping the wooden sticker needles in the holes of the guide rail when removing an Acrosonic action. I had to put them all back when the rail came off. It was not fun and I'd like to try and avoid that situation again. Thank you, Brian P. Doepke Brian Use 3-4 old damper blocks, slide them onto the sticker wire above the guide rail and tighten the screws before pulling the action. You may need to ream them to a larger daimeter. Paul C -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070106/b3789e45/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC