false beats, real jazz and satisfaction

Farrell mfarrel2 at tampabay.rr.com
Sat Jan 13 15:05:09 MST 2007


The soft pedal of most uprights is the one that pushes the hammer rail forward. I suspect the "moderator rail" is the mute rail - usually the middle pedal on verticals equipped with that feature (if one can call it that - I have several four-letter-word descriptions for those #%&$s).

Terry Farrell
  ----- Original Message ----- 

  Probably the "soft pedal" which on Yamahas is that felt strip that goes between the strings and hammers once depressed. 

  John Formsma

  Alan R. Barnard wrote: 
While assembling the piano after tuning I noticed that the felt of the 
moderator was too low so that the hammers touched it, but I couldn´t 
position it correctly because the spring of the moderator rail was worn out. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070113/97606095/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC