Hi Mark Totally relate Dale I tried using a cardboard shim behind the pivot blocks, but the bass end would have needed two shims, and I wasn’t comfortable with that. Besides I had already made a new set of blocks once for this job to allow for improved geometry – using the old ones would have placed the pivot pins too close to the upper edge of the new tray – so I was all set up for turning out another block quickly. - Mark Dierauf -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070116/9211ad62/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC