Pelican spring screws pulling out of bottom board? Joseph Alkana RPT ----- Original Message ----- From: <reggaepass at aol.com> To: <pianotech at ptg.org> Sent: Tuesday, January 16, 2007 12:18 PM Subject: puzzler: vertical damper pedal problem > List, > > Went to tune a Sohmer console (although the problem in question was not > necessarily specific to this make). Client complained that the damper > pedal wasn’t working well. Dampers were coming off the strings when the > pedal was fully depressed, but just barely. I turned down the nut on the > threaded rod attached to the pedal to time the lift sooner. Not enough > time on that visit to determine why it had gone out of adjustment > (assuming it had ever been IN adjustment). Problem solved….until several > months later when the client called that the damper pedal was again not > working, making playing her piano a “hateful” experience. Well, we can’t > have that, said I, so off I went to get to the bottom if this problem. > Turned out to be something I hadn’t seen before. Can you guess what it > was? > > Cheers, > > Alan Eder > > > > ________________________________________________________________________ > Check out the new AOL. Most comprehensive set of free safety and security > tools, free access to millions of high-quality videos from across the web, > free AOL Mail and more. > >
This PTG archive page provided courtesy of Moy Piano Service, LLC