I think the Yankee ratchet is still available (try Grainger). But for the job at hand, there is a much superior tool, one made precisely for rocker capstans: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 160 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070123/45f543fe/attachment.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: Offset eBay.a.jpg Type: image/jpeg Size: 16627 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070123/45f543fe/attachment.jpg -------------- next part -------------- (Sometimes called the Bechstein offset screwdriver) This is the only tool which will preserve your sanity when adjusting grand rocker capstans. For more info, look here: http://www.pianofortesupply.com/offsetinfo.html Jurgen Goering Piano Forte Supply (250) 754-2440 info at pianofortesupply.com http://www.pianofortesupply.com On Jan 23, 2007, at 8:58, Alan Forsyth wrote: Does anyone know if these tools are still made? > ? > <unknown.jpg>? > I use this one for adjusting rocker capstan screws as below. > ? -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 799 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070123/45f543fe/attachment-0001.bin
This PTG archive page provided courtesy of Moy Piano Service, LLC