Kimball Consolette keytop problem

[pianolady50 at peoplepc.com]

Michelle,

Having been in the keytop replacement business for over ten years, I say take Avery's advice.  Send them to someone with the machining set up for doing a professional job.  

Debbie
  ----- Original Message ----- 
  From: Avery 
  To: Pianotech List 
  Sent: Sunday, January 28, 2007 3:09 PM
  Subject: Re: Kimball Consolette keytop problem


  Michelle, 

  Personally, I'd prefer to send them to someone who does that for a living. They'll probably do a better job and considering the time and effort for you to do it, you'll probably come out cheaper. And better. JMO. 

  Avery 

  At 01:34 PM 1/28/2007, you wrote:

    Hi all.  Ive just been asked to do a keytop replacement on a Kimball Consolette.  This is the second one of these Ive seen in my community where the plastic is severely yellowed and shattered.  
     
    The problem Im encountering is that the one size fits most keytops from Schaff are too wide on the tails.  Is there a certain keytop I should buy for replacements or do I need to trim the Schaff keytops?  Also, the original keytops are not shaped on the sizes.  They are straight cut.
     
    Just so you know, this piano is in pretty bad shape but the little 90 year old lady who owns it would really like to be able to play her piano again.
     
    Thanks for your help!
     
    Michelle Smith
    Smith Piano Service
    Bastrop, Texas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070128/5c87218b/attachment.html