As one final comment on the topic (from me, at least)....Remember that it is totally appropriate, aesthetically correct, and in most cases, for ease of case part fitting, necessary to maintain not only the same overall key thickness but length from the balance rail hole to the front of the key. This usually requires a method for removing not only the key front and top but the required thickness of key wood from both surfaces. Debbie -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070128/1b55c4dc/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC