Action Ratio and Dip and Blow and Etc.

[Erwinspiano at aol.com]

Sorry let's try this again. What I meant to say is that  the 18 mm knuckle 
position will often take regulation specs to very do  places.  In this case a 
very long dip ie..425 & short blow 1 1/2  inches. The rest ...what David said.
  Dale
 
 
Or the regulation

    Dale

 
David Love wrote

Moving  the knuckle (better to have bought the shank with the correct knuckle 
to  begin with) to 17 mm and taking 1 gram off the hammer you will achieve  
approximately the same goal as moving the knuckle to 18 mm (maybe a little  
better in fact).



 



************************************** See what's free at http://www.aol.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070704/8ca9dca4/attachment.html