Great idea, Mike. I'll remember this possibility. br ----- Original Message ----- From: "Mike Spalding" <mike.spalding1 at verizon.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Friday, March 09, 2007 1:23 PM Subject: Re: keyend felt > Barbara, > > The last time I ran into this, I cut the keystick down so that the > Steinway thickness would fit. Did it on the bandsaw, with the old felt > still on there, and spent less time than it usually takes to remove the > felt. Might as well set up the piano to use high quality readily > available materials. > > Mike > > Barbara Richmond wrote: >> Hi All, >> >> I guess the only pianos I've put key-end felt on have been Steinways. >> Whose or what felt would you use for a piano that didn't need as thick >> felt? The damper system on a Knabe Grand that has been, umm, >> questionably re-done and it's going to be exciting to sort it all out >> since this is the first time (except on Steinways) that I'm working to >> correct a rebuilt piano that someone else has bungled up. >> >> Barbara Richmond, RPT >> near Peoria, Illinois >
This PTG archive page provided courtesy of Moy Piano Service, LLC