Thanks, Paul. You're SO good! :-D Avery Todd University of Houston At 08:22 AM 3/12/2007, you wrote: >Take a piece of scrap plywood (6"x12"....exact size doesn't matter >much), drill two holes 3" apart, insert dowels that protrude 1/2". > >Drill two holes in the bottom of the canister 3" apart, big enough to >accept dowels. Clamp plywood to bench, set canister on dowels, use strap >wrench to unscrew canister top. > >Paul E. Dempsey, RPT >Piano Technician Sr. >Marshall University >Huntington, WV >304-696-5418 >304-617-1149 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070312/8ef9e783/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC