Spring Rail

[Paul McCloud]

Hi, Scott:
    I've not heard of anyone advertising this service.  The job isn't all that difficult if you want to do it yourself.  You might want to check the archives of this list for hints on how to do this.  
    Paul McCloud
    San Diego


----- Original Message ----- 
From: Scott Rogers 
To: pianotech at ptg.org
Sent: 03/17/2007 11:03:27 PM 
Subject: Spring Rail


Does anyone have any information about who may do vertical hammer spring rail overhauls? (replace all springs)
Thanks, 
Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070317/3781544c/attachment.html