Oooh, that's a great way to do it, John! And now that you've described the method, I believe I've run into factory-installed springs done that way. I wondered about the curve in the wire, but didn't take the thought any further. Thank you so much. Annie -----Original Message----- From: John Ross [mailto:jrpiano at win.eastlink.ca] Sent: Sunday, March 18, 2007 1:28 PM To: annie at allthingspiano.com; Pianotech List Subject: Re: Spring Rail Rather than push it into the slot, I much prefer to drill another hole, down the slot a bit. I then thread the end of the wire in, and pull tight. I then goes into the slot much easier, and tighter. Then just glue, and add felt over the slots. John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070318/03dd76fe/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC