Perfect solution. Cutting off the top corner might even be easier. Bring a marker to color in the cut edge so it doesn't show. --Cy-- ----- Original Message ----- From: "Bob Hull" <hullfam5 at yahoo.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Monday, May 07, 2007 10:48 PM Subject: DC install problem > I'm installing a complete DC system on a Yamaha U1. > > The bottom panel doesn't have a gap between the top of > it and the keybed. So, how is the water tank fill > tube going to stick out? I'm thinking about using a > dremel to make a "half hole" in the top edge of the > bottom panel that will be big enough for the tube. > Any better ideas? > > Bob Hull
This PTG archive page provided courtesy of Moy Piano Service, LLC