keytops

[Ron Nossaman]

John Ross wrote:
> *I have noticed that since Schaff changed to a softer plastic, that 
> there appears to be surface marks on the keys.*
> *They don't seem to buff out that easy, even although I use a soft 
> buffing wheel, one of the layered ones.*
> *I found that the easiest way to remove the imperfections is to work up 
> to 800 -1200 grit paper.*
> *I think it was Ron Nossaman (sp) that suggested this.*
> *With the harder plastic, these marks could be buffed out. I think I 
> have 7 more sets to go, then I will be on the lookout for a different 
> top for my replacement jobs.*
> John M. Ross

I've been using 600 (800 ok too) grit to finish, and don't 
buff at all. Not a high gloss sort or guy.
Ron N