Articles on Pinblock Replacement?

[Dave Smith]

Thanks, John, I somehow missed this item..  A lot more convenient than 
trying to search years of journals for "pinblock" and getting all the hits 
for advertisements.

Dave
----- Original Message ----- 
From: "John Formsma" <formsma at gmail.com>
To: <annie at allthingspiano.com>; "Pianotech List" <pianotech at ptg.org>
Sent: Sunday, May 27, 2007 9:50 PM
Subject: Re: Articles on Pinblock Replacement?


> Look at ptg.org in the Online Store. Click on CD-ROM's & Journal
> Resources. It's the fourth item from the top of the list.
>
> JF
>
> On 5/27/07, Annie Grieshop <annie at allthingspiano.com> wrote:
>> There is?  Where?  Sounds wonderful.
>>
>> I've been thinking about creating a once-and-for-all topic index to the 
>> "20
>> Years" CD set (since the built-in word-match index isn't as useful as it
>> could be), but the catalog you've referenced would be a whole lot easier.
>>
>> Annie
>>
>> > -----Original Message-----
>> > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org]On
>> > Behalf Of John Formsma
>> > Sent: Sunday, May 27, 2007 7:10 PM
>> > To: Pianotech List
>> > Subject: Re: Articles on Pinblock Replacement?
>> >
>> >
>> > Rather than searching through individual Journals, there is a "Catalog
>> > of Reprints" CD which is a collection of specific technicial articles
>> > that should include this.
>> >
>> > JF
>> >
>> > On 5/27/07, Dave Smith <dsmith941 at comcast.net> wrote:
>> > >
>> > >
>> > > I am probably faced with replacing my first pinblock, in a Knabe 1937
>> > > 5'4"  grand.  Although I can perphaps get the help of Mr Farrell and 
>> > > Mr
>> > > Bondi, I want to study up on my own as much as possible,  Have tried
>> > > searching the CD's of journal articles, but my searching skills
>> > are equal to
>> > > my pinblock skills.
>> > >
>> > > So, can anyone please point me to good journal articles,
>> > hopefully including
>> > > month and year?  Or any other good reference material.  Although I 
>> > > have
>> > > helped Phil Bondi remove a plate from a grand, I have yet to do this
>> > > myself.  I am reading the drilling pinblock postings of late with 
>> > > great
>> > > interest.  I wont want to tool up as much as some of you have,
>> > just because
>> > > at this late date, I probably wont ever do this again more than once 
>> > > or
>> > > twice.
>> > >
>> > > Again, thanks for any help!
>> > >
>> > > Dave Smith
>> > > SW FL
>> >
>>
>>