Dale, that makes complete sense about the ease of changing heads rather than tips! I'll think about getting a spare head in due course. I must say the Fujan lever gives a feeling of great power and control. It's as if a set of variables has been eliminated (which in truth it has - the flexing, and inertia to flexing, etc of a steel shaft) and you have a more direct connection to the tuning pin. The first time I used the Fujan properly was on two school uprights(Marshall & Rose) and I was just delighted with how easily they tuned up and sounded sweet(the school has six pianos but is closing in a few weeks for a new build, so they just wanted two done for music exams). There's no way I could ever go back now to the Fletcher and Newman standard lever I've been using for 20 years. I will keep my other interchangeable-head lever in my case as I have a head for oblong pins, which I occasionally meet. Best, David. "Hi David Yes, yes, join the Fujan revolution! Pronounced (Fuyan) according to the hammers maker. I have used to for about 2 months & love tuning again. I like the 15 degree head but as you've discovered sometimes it needs the extension which I just received. I also bought the 5 degree head with extension & with the short tip it mimics the spec on my Yamaha hammer set up. A very good hammer in it's own right but the other day I was tuning a Steinway B we restored & I'm very familiar with the pinblock feel so I pulled out the Yamaha only to discover how truly heavy it is compared to the Fujan. I find that with the extra head it's easier to spin the head out of the handle than to change tips. Just my 2 cents Dale"
This PTG archive page provided courtesy of Moy Piano Service, LLC