on rib notching

[Gene Nelson]

Thanks Terry.
Gene
  ----- Original Message ----- 
  From: Farrell 
  To: Pianotech List 
  Sent: Monday, November 12, 2007 5:38 AM
  Subject: Re: on rib notching


  Another method is to mark (painter's tape) the inside of the outer rim with the general rib end locations. Next, place a small dollop of Playdough on the inner rim where the notch will be:


  Put some painter's tape on the rib ends to keep them clean:


  Then press the soundboard in place and you will get nice perfectly positioned imprints of the rib ends.


  Notch away. Cean off any dried Playdough residue with a light sanding.


  Easy and very accurate. 

  Oh, and....... FUN!!!!!!!

  Terry Farrell
    ----- Original Message ----- 

    Would anyone care to share their technique for locating and notching rib ends into the inner rim?
    Gene
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071112/172c893d/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 65435 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071112/172c893d/attachment-0004.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 35987 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071112/172c893d/attachment-0005.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 43695 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071112/172c893d/attachment-0006.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 49192 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071112/172c893d/attachment-0007.jpe